Linear Encoded X-Y Stages
319-222-1 4x2 Microstage Table Designed to be mounted on Mitutoyo optical instruments such as profile projectors and measuring microscopes.

Specifications:

Travel: 4" x 2"
Table Size: 11.8" x 9.4"
Glass Size: 7.5" x 6.3"
Shank DIA.: Linear Scale AT-12
Height: 2.95"
Mounting Pitch: 4-M6 (210mm x 140mm)
Weight: 40.7 lbs.

    319-225-1 8x2 Microstage Table Designed to be mounted on Mitutoyo optical instruments such as profile projectors and measuring microscopes.

    Specifications:

    Travel: 8" x 2"
    Table Size: 14.96" x 9.84"
    Glass Size: 11.02" x 7.09"
    Shank DIA.: Linear Scale AT-112
    Height: 2.95"
    Mounting Pitch: 4-M6 (210mm x 140mm)
    Weight: 40.7 lbs.

      LARGE TRAVEL X - Y STAGES Large Travel X - Y Stages Large Travel X-Y Stage Features:

      • High speed DC servo motors directly coupled to fine pitch leadscrews and 0.5 micron resolution encoders for closed loop X-Y control
      • Thin cross-section (1.6") allows RK250, RK300, and RK350 stages to mount on full-frame microscopes
      • Custom flat-panel holders can be designed to hold a single large panel or multiple small panels
      • Proprietary Rigid-Kore provides exceptional stability and accuracy
      • High quality stainless steel leadscrews with anti-backlach nut for accurate motion
      • Cross-roller bearing slides made from single piece hardened alloy steel for excellent flatness and rigidity
      • Controller (PC req'd), Ergonomic Joystick, and Windows 9x/NT software included


        DISK MEDIA INSPECTION STAGES Disk Media Inspection Stages Disk Media Inspection Stage Features:

        • DC servo motors and rotary encoders for closed loop X-Theta control with 1 micron 0.025 degree resolutions
        • Manual Y-axis leadscrew control with quick release and Y-axis stop
        • Hub supports hard disks on inner edge above stage, keeping sensitive surfaces free from contact
        • Thin cross-section (1.9") allows stage to work with most microscopes including Leica, Nikon, Olympus, and Zeiss
        • Rigid and durable proprietary KORE-FRAME design directly links X and Y axes in single piece of metal, providing excellent squareness, flatness, and precision
        • Linear accuracy, flatness, and straightness better than 1 in 3000
        • Repeatability within 2 microns
        • Stainless steel precision leadscrews with anti-backlash nut provide fine resolution and accurate control
        • Roller bearing slide mechanism made from single piece hardened alloy steel uses cross-roller bearings for extra precision and rigidity


        PRECISION X - Y MOTORIZED STAGES Precision X - Y Motorized Stages Precision X-Y Motorized Stage Features:

        • DC servo motors directly coupled to 2mm pitch leadscrews and 1 micron resolution rotary encoders for closed loop X-Y control
        • Direct-drive 24V motors (for advanced controller) or gear-reduction 12V motors (for standard controller)
        • Thin cross-section (0.96" to 1.6") allows stage to work with most microscopes including Leica, Mitutoyo, Nikon, Olympus, and Zeiss Large variety of accessories for mask and wafer inspection
        • Rigid and durable proprietary KORE-FRAME design directly links X and Y axes in single piece of metal, providing excellent squareness, flatness, and precision
        • Linear accuracy, flatness, and straightness better than 1 in 3000
        • Repeatability within 2 microns
        • Stainless steel precision leadscrews with anti-backlash nut provide fine resolution and accurate control
        • Roller bearing slide mechanism made from single piece hardened alloy steel uses cross- roller bearings for extra precision and rigidity


        |Back|